Simple Strategies : Adding Mini Album To Your PL Album

Hello there! Its Sam today to show you one of the simple way to incorporate a mini album into your Project Life album.

I always like to make mini album to store all my travelogue, photos and memorabilia from my trip. When there's a week that I actually went travelling, I would prefer making a mini album and slot it into the respective weekly PL spread. And here is the mini album I made for my friend's Spain trip using July Main kit and add-ons.

And today I am going to show you how to modify the normal 8.5 x 11 inch (letter sized) page protector to fit my mini album that measures about 7 x 7 inch. This is how it looks like when I fit it into my normal weekly spread. This simple strategy tutorial is totally inspired by Kasia on how she stores her layouts.

These are the tools that you need:

Mini album
Page protector (I use American Crafts 8.5 x 11 sleeve)
Patterned paper of your choice
Tape glue
Twine (from the kit packaging)
We R Memory Keepers - Crop-A-Dile
1-inch circle punch
2 x eyelets
Scissors & Paper trimmer

Firstly cut paper stripe measuring 6 x 12 inch, fold at 2 inch mark (on the short side). Then punch two 1-inch circles and punch each a small hole in the centre of the circle using Crop-a-dile.

Move on to trimming the height & width of the page protector to fit the album snugly. You could skip this step if you do not have a sewing machine.

I eyeball the length (top & side) that needed to be trimmed down. You could leave about 1/2 to 1 inch extra room for your album.

Then use tape glue to stick the paper stripe to the back of the page protector. You could staple it down or stitch with sewing machine to make sure the paper adhere to the plastic sleeve.

I trimmed the corner to make it looks more like an envelop and stitch all the corner. Again, you can skip this step if you do not have a sewing machine.

Punch a small hole in the middle of the front flap & plastic sleeve . Again, I eyeball the placement of the hole.

Add the 1 inch circle & eyelet on the hole and set it with Crop-a-dile. Then wrapped twine around the bottom circle.

Here is the final product. A thinner album would fit into this sleeve nicely but I went crazy adding embellishment to my album. If you have any question about customizing your own page protector, do comment and ask!